Table of Contents
Advertisement
5.6.9. RGbW White adjust
RGB TO WHITE is set to YES, then if RGB is set to 255 255 255 the color matches a perfect
white as the actual RGB values are adjusted to make white.
When it is set to NO, then if RGB is set to 255 255 255 the RGB values are not adjusted and
the output is most powerful. The RGBW parameter can be adjusted in CAL2.
Enter DIM to select dimmer mode and dimmer speed. When DIMMER is set to OFF then
RGBW and MASTER Dimmer are linear. The Dim 1/2/3/4 are speed modes of the nin linear
dimmer, DIM1 is the faster, while DIM4 is the slowest. The DIM setting here does not react on
the STAG mode
5.6.10.
CAL1
-
Enter the CAL1 to select white color of different color temperature
-
There are 11 pre programmed white colors can be edited by using RED; GREEN; BLUE
5.6.11.
CAL2
-
Enter the CAL2 to adjust the RGB parameter to make different whites.
-
When the new setting is activated the DMX controller choose RGB = 255 255 255, the white
color will be made by the actual RGB values in the CAL2
5.6.12.
Key Lock
-
Enter the KEY mode to select wether the access password is on or off.
-
In order to enter access password it is necessary to first press ENTER.
-
Access password is UP+DOWN+UP+DOWN
16 / 21
Advertisement
Table of Contents
