Table of Contents
Advertisement
5.9
PnP/PCI Configurations
This section describes the configuration of the PCI bus system.
Peripheral Components Interconnect (PCI), is a system that allows I/O
devices to operate at speeds nearing the speed the CPU itself uses
when communicating with its own special components. This section
covers some very technical items and it is strongly recommended that
only experienced users should make any changes to the default
settings.
Phoenix - AwardBIOS CMOS Setup Utility
PNP OS Installed
Reset Configuration Data
Resources Controlled By
X IRQ Resources
PCI/VGA Palette Snoop
Assign IRQ For VGA
Assign IRQ For USB
** PCI Express relative items **
Maximun ASPM supported
Maximum Payload Size
↑↓← →: Select Item
+/-/PU/PD: Value
F5: Previous Values
PnP/PCI Configurations
[No]
[Disabled]
[Auto(ESCD)]
Press Enter
[Disabled]
[Enabled]
[Enabled]
[L0s&L1]
[4096]
F10: Save
F6: Fail-Safe Defaults
Item Help
Esc: Quit
F1: General Help
F7: Optimized Defaults
51
Advertisement
Table of Contents
