Attaching/Removing The Stand; Attaching The Stand - Panasonic KX-UT670 Getting Started

Attaching/Removing the Stand

The stand can be attached to the unit in two ways in order to change the angle of
the unit. Depending on the angle you want to use the unit at, the holes to which you
attach the stand differ, so determine your preferred angle before attaching the stand.
If you want to change the angle after you have attached the stand, remove the stand
(Page 16), and then reattach it at the desired angle.

Attaching the Stand

1.
Insert the 4 tabs into the holes on the back of the unit body (either A or B).
■
For "A"
■
For "B"
30°
Attaching/Removing the Stand
A
B
65°
15