Table of Contents
Advertisement
USER MANUAL - BEAM 300 / BEAM 700
X
000
-Change the value from 0-255 via the Rotating Wheel to select the effect; press
value (After exit the menu, all the DMX value will be 0); When there is DMX signal, the manual mode
always has the priority, When exit the manual mode, the fixture will be back to the DMX value.
-Select the program you wish and press
ENTER
again is possible to pause the program running. You can exit every mode by pressing the
Mode/ESC
-button. The function provided is described in the following sections:
Accessed to the menu as above, by pressing
MODE1 16CH
CHANNEL
CH1--PAN
CH2--TILT
C3--XY SPEED
CH4--COLOR WHEEL
ENTER
. The selected program starts running. By Pressing
ENTER
DMX CHANNEL Assignments
16CH BEAM300 DMX PROTOCOLS
DMX VALUE
0--255
0--255
0--250
XY Speed from fast to slow
251--255
0--13
14--27
2
28--41 Color
3
42--55 Color
4
56--69 Color
5
70--83 Color
6
84--97 Color
98--111
8
ENTER
and display:
FUNCTION
0°--540°
0°--280°
XY Fast speed
White
Color 1
Color 7
, reserve the
REMARK
Advertisement
Table of Contents
