Table of Contents
Advertisement
If the EH0286 is not operating, proceed as follows:
Check that the mains plug is firmly in the socket, and that the
socket is switched ON.
Check that at least one of the power control switches is
switched ON.
The EH0286 also has a overload protection device to prevent
overheating. If this operates, disconnect the heater from the
mains supply, and remove any objects on or adjacent to the
heater that could have caused the overheating. Wait 10
minutes, and reconnect to the mains supply.
If the heater still does not function, or the overload protection
device operates again, consult an authorised service agent.
Dimensions:
Weight:
Power supply:
Power consumption:
Operating current:
FAULT-FINDING
TECHNICAL SPECIFICATION
410×370×130mm
4.4kg
230V AC
800W
3.5A
Page 7
Advertisement
Table of Contents
