Table of Contents
Advertisement
Before cleaning, turn the heater off, and disconnect from the
mains supply. The heater may then be cleaned using a damp
cloth with a drop of washing-up liquid to remove any dust or
dirt from the case. Do no use stronger detergents or solvents
as these may damage the plastic.
This heater is filled with a precise quantity of special oil.
Repairs requiring the opening of the oil container are only to
be made by the manufacturer or his service agent who
should be contacted if there is an oil leak.
If the mains lead is damaged, it must be replaced by the
manufacturer or an authorised service centre. If the mains
plug needs to be replaced, proceed as follows:
outer sheath of the cable) and it fully tightened.
When used in an office environment, this product must be
safety-tested yearly by a qualified electrician (PAT Tested) in
order to comply with the Electricity at Work Regulations.
We recommend that it is PAT tested regularly when used in a
domestic environment.
MAINTENANCE
•
Connect the brown wire to the
terminal labelled "L".
•
Connect the blue wire to the
terminal labelled "N".
•
Connect the green/yellow wire
to the terminal labelled with the
earth symbol or "E".
•
Make sure that the cord-grip is
positioned correctly (over the
PAT TESTING.
Page 5
Advertisement
Table of Contents
