Lens Block Section - Sony DSC-W350 Service Manual

2-1-4. LENS BLOCK SECTION

ns: not supplied
151
(Note 1, 2)
ns
159
#176
#30
ns
158
153
ns
154
153
152
Ref. No. Part No. Description
151 8-848-861-01 DEVICE, LENS LSV-1380A (Note 1, 2)
152 4-155-850-01 RING A (S), ORNAMENTAL
153 4-147-109-01 TAPE, BARRIER
154 A-1743-714-A BARRIER ASSY
155 4-147-091-01 FRAME, 1 GROUP
156 A-1743-728-A CAM TUBE BLOCK ASSY
157 A-1743-727-A STRAIGHT TUBE LUBRICATED ASSY
158 1-787-874-11 STEPPING MOTOR, OPTICAL(F1380)
159 4-147-113-01 SEAL, FG
160 A-1743-730-A WORM B LUBRICATED ASSY
DSC-W350_L2
ns
#30
162
ns
161
160
ns
156
ns
155
Ref. No. Part No. Description
161 A-1743-731-A NARUTO GEAR LUBRICATED ASSY
162 A-1743-725-A DC MOTOR WORM A ASSY
163 A-1731-547-A CD-774 BOARD, COMPLETE (including IC001
(CCD imager)) (Note 3)
#30 3-086-156-11 SCREW B1.2
#176 3-947-504-31 SCREW (M1.2)
DISASSEMBLY
163
1. The meaning of the sign in left figure is as follows. Be careful when it removes.
(including IC001
◇: Solder
(CCD imager))
(Note 3)
#30
Screw
#30: M1.2 X 3.5 (Tapping)
(White)
3-086-156-11
1.2
3.5
Note
Note 1
PRECAUTIONS WHEN HOLDING THE LENS BLOCK
• Hold the Lens Block at the
center of both sides.
Hold here.
157
Note 2: レンズブロックの各部品を交換する際は，下記の各項目を参照してください。
• 1-. ORNAMENTAL RING A OR BARRIER ASSY REPLACING METHOD (page 1-)
• 1-. OPTICAL STEPING MOTOR (F1380) REPLACING METHOD (page 1-)
• 1-8. DC MOTOR WORM A ASSY REPLACING METHOD (page 1-8)
• 1-. CAM TUBE BLOCK ASSY AND STRAIGHT TUBE LUBRICATED ASSY AND 1
GROUP FRAME REPLACING METHOD (page 1-8)
• 1-10. FINAL INSPECTION (page 1-12)
Note 2: Refer to the following each item when you exchange parts of Lens Block.
• 1-. ORNAMENTAL RING A OR BARRIER ASSY REPLACING METHOD (page 1-)
• 1-. OPTICAL STEPING MOTOR (F1380) REPLACING METHOD (page 1-)
• 1-8. DC MOTOR WORM A ASSY REPLACING METHOD (page 1-8)
• 1-. CAM TUBE BLOCK ASSY AND STRAIGHT TUBE LUBRICATED ASSY AND 1
GROUP FRAME REPLACING METHOD (page 1-8)
• 1-10. FINAL INSPECTION (page 1-12)
Note 3: Be sure to read "Precautions for Replacement of
Imager" on page -1 when changing the imager.
2-
#1: M1.2 X 2.0
(Silver)
3--50-31
1.2
2.0
• Do not hold the following part.
Lens Flexible Board
Note 3: イメージャの交換時は6-1ページの"イメージャ交換時
の注意"を必ずお読みください。