Dmx Control - BoomToneDJ Fog-1500 DMX User Manual

Wired timer remote
Wired timer remote
Connect this controller with the 5-pin DIN connector on the rear of the machine.
1. Interval selection: Determines the timespan when the machine is activated.
2. Duration selection: Determines the duration if the timer activates the machine. 3.
Output intensity: Output 0-100% (variable)
4. Timer functionality on/off
5. Continuous fog: Continuous operation with the selected output intensity
6. Manual fog: Fog projection at the selected output intensity, when pressed
Yellow LED: Timer function on/off
Red LED: Continuous fog function on/off
Green LED: Fog machine ready-indicator

DMX control

Connect the fog machine to your DMX-controller, using standard XLR male to XLR female
cables. Select the correct DMX starting address by using the dipswitch panel just above
the XLR-connectors. A status LED is provided, indicating that the machine receives
DMX-signal from your controller.
8