Table of Contents
Advertisement
Available languages
Available languages
6. Manual fog: Fog projection at the selected output intensity, when pressed
Yellow LED: Timer function on/off
Red LED: Continuous fog function on/off
Green LED: Fog machine ready-indicator
Menu
d001-d512
H 0-5
F 0-5
Flash
F ( Fan Speed) and h ( Haze Output) are settings for continuous stand- alone
operation and will override any remote control.
When you first turn on the Haze machine you show wait for around 2 minutes while the
unit warms up. When completed you will have access to various options if the wired
remote control is not connected.
Press menu to scroll through the various options listed below. Use the up and down keys
to set the secondary functions.
DMX control
Connect the fog machine to your DMX-controller, using standard XLR male to XLR female
cables. Select the correct DMX starting address by using the control panel just above the
XLR-connectors.
DMX address adjustment
Manual haze output 0=off, 1=low,5=high
Manual fan speed 1=slow, 5=high
Fluid-less protection, please add fluid!
Description
10
Advertisement
Table of Contents
