Yamaha 2002 FJR1300 Supplementary Service Manual page 29

FRONT FORK
3. Install:
• collar 1
• collar 2
• front fender 3
• front fender bolts
NOTE:
• Install the collar 1 from the outside of the
front fender.
• Install the collar 2 from the inside of the
front fender.
• When installing the front fender, make sure
that there is no dirt between the front fender
and front fork.
4. Adjust:
• spring preload
• rebound damping
• compression damping
Refer to "ADJUSTING THE FRONT FORK
LEGS" in chapter 3. (Manual No.: 5JW1-AE1)
– 21 –
CHAS
6 Nm (0.6 m · kg)