Yamaha 2002 FJR1300 Supplementary Service Manual page 16

È Connect the wire harness and right handlebar
switch lead.
É Pass the left handlebar switch lead, main switch
lead, headlight lead, and clutch cable through
the hole on the left side of the frame.
Ê Pass the right handlebar switch lead and throttle
cables through the hole on the right side of the
frame.
Ë To the lower left slit of the plate
CABLE ROUTING
Ì To the cylinder identification sensor
Í To the fuel tank
Î Pass the cylinder identification sensor lead
through the lead guide of throttle body.
Ï To the sidestand switch lead
Ð Pass the cylinder identification sensor lead
under the fuel hose and then to the wire har-
ness.
– 8 –
SPEC