Chapter 5 : Clip Operations; Clip Playback; Thumbnail Screen - Sony PMW-500 Operation Manual

5 Clip Operations
Chapter

Clip Playback

A thumbnail screen appears if you press the THUMBNAIL button in E-E or playback mode. Thumbnail
screens display lists of the clips stored on S×S memory cards in the form of index pictures. (A message
appears if you insert a memory card that contains no clips.)
You can select any clip (see page 82) in a thumbnail screen and start playback of that clip (see page 82).

Thumbnail Screen

In thumbnail screens, the timecode of the index picture appears beneath the thumbnail for each clip. (An
OK, NG or KP mark also appears when a clip has been marked with an OK, NG or KP mark.)
Note
Normal thumbnail screens display SD clips only or HD clips only, even if the S×S memory card contains clips in both
formats. You can select the format to display by selecting a mode with OPERATION >Format >HD/SD (see page 99) in
the setup menu.
If you want to display all recorded clips, regardless of the HD/SD mode, switch to the all clips thumbnail screen.
However, it is not possible to start playback from the all clips thumbnail screen (see page 87).
Clip Playback 79