Chapter 8 : Connecting External Devices; Connecting External Monitors - Sony PMW-500 Operation Manual

8
Chapter
You can connect an RM-B150/B750 Remote Control Unit and operate this camcorder. For connection and
operation of the RM-B150/B750, refer to the Supplement supplied in the CD-ROM (labeled "Manuals for
Solid-State Memory Camcorder").

Connecting External Monitors

Select the output signal and use an appropriate cable for the monitor to be connected.
Regardless of whether the signal is HD or SD, the
same status information and menus can be
displayed on the external monitor as those on the
viewfinder screen.
144 Connecting External Monitors
Connecting External Devices
BNC cable (not supplied)
BNC cable (not supplied)
Note
SD signals down-converted for output have the
following restrictions:
Images of 50P/50i/25P are output as PAL signals, those
of 59.94P/59.94i/29.97P are output as NTSC signals, and
those of 23.98P are output as 2-3 pulled-down NTSC
signals.