Sony PMW-500 Operation Manual page 155

Solid-state memory
Hide thumbs Also See for PMW-500:
Table of Contents

Advertisement

WARNING indicator Warning sound
Problem
Operation in the recorder
module
The DC IN voltage has
Recording continues.
become low (stage 1).
WARNING indicator Warning sound
Problem
Operation in the recorder
module
The DC IN voltage is
Recording stops.
too low (stage 2).
Recording cannot be
performed.
WARNING indicator Warning sound
Problem
Operation in the recorder
module
An error was detected
Recording stops.
with the battery pack.
WARNING indicator Warning sound
Problem
Operation in the recorder
module
The remaining power
Recording continues.
of the backup battery
is insufficient.
WARNING indicator Warning sound
Problem
Operation in the recorder
module
A partitioned memory
Recording continues.
card or one that
contains recorded clips
exceeding the number
permitted with this
camcorder is loaded.
Tally/REC
Battery remaining
Action to take
Check the power supply.
Tally/REC
Battery remaining
Action to take
Connect other power source.
Tally/REC
Battery remaining
Action to take
Replace the battery pack with a normal one.
Tally/REC
Battery remaining
Action to take
Refer to a Sony service representative to replace
the battery with a new one.
Tally/REC
Battery remaining
Action to take
This card cannot be used with this camcorder.
Remove it and load a compatible card.
Operation Warnings
155

Advertisement

Table of Contents
loading

Table of Contents