Protecting Clips; Copying Clips - Sony PMW-500 Operation Manual

To delete an OK, NG or KP mark
UDF
1
In the thumbnail screen, select the
thumbnail of the clip from which you
want to delete an OK, NG or KP mark,
and select THUMBNAIL >Set Clip Flag
>None.
The screen changes to the clip properties
screen, and a confirmation message appears
beneath the index picture.
2
Select [Execute], and press the MENU
knob.
The mark selected in step
selected clip.

Protecting Clips

UDF
When the recording mode is UDF, you can
protect a selected clip or all clips. Protected clips
cannot be deleted or divided.
To protect a clip
1
In the thumbnail screen, select the
thumbnail of the clip which you want to
protect, and select THUMBNAIL
>Lock Clip.
The screen changes to the clip properties
screen, and a confirmation message appears
beneath the index picture.
2
Select [Execute], and press the MENU
knob.
The selected clip is protected.
To protect all clips
1
In the thumbnail screen, select
THUMBNAIL >Lock All Clips.
A confirmation message appears beneath the
index picture.
2
Select [Execute], and press the MENU
knob.
All clips are protected.
90 Thumbnail Operations
To cancel protection of a clip
1
2
To cancel protection of all clips
2
is added to the
1
2
You can copy clips to other S×S memory cards.
Clips are copied to destination S×S memory cards
using the same names as the original clips.
• If a clip with the same name already exists at the copy
• If the parenthetical numbers (1) to (9) already exist at
• A message appears if there is not enough free capacity
• When multiple clips are recorded in a source S×S
In the thumbnail screen, select the
thumbnail of the clip which you want to
unprotect, and select THUMBNAIL
>Unlock Clip.
The screen changes to the clip properties
screen, and a confirmation message appears
beneath the index picture.
Select [Execute], and press the MENU
knob.
The selected clip is unprotected.
In the thumbnail screen, select
THUMBNAIL >Unlock All Clip.
A confirmation message appears beneath the
index picture.
Select [Execute], and press the MENU
knob.
All clips are unprotected.

Copying Clips

Notes
destination S×S memory card, a one-digit number in
parentheses is added to the original name.
The number in parentheses is the smallest number that
does not exist at the copy destination.
Examples:
ABCD0002tABCD0002(1)
ABCD0002(1)tABCD0002(2)
ABCD0005(3)tABCD0005(4)
the copy destination, it is not possible to copy any more
clips under that name. (A tenth clip cannot be copied.)
at the copy destination S×S memory card. Exchange
the card for one with more free capacity.
memory card, it may not be possible to copy all clips
to the end. Depending on memory characteristics and
usage of the memory cards, this can occur even when