Stand-Alone Test; General Description - LG TU750 Service Manual

11. STAND-ALONE TEST

11. STAND-ALONE TEST

11.1 General Description

1) General Description
This document describes the installation and software usage for the stand-alone test of LG's
GSM/GPRS/EDGE/WCDMA Mobile Phone. The test menu and it's result is displayed in PC
terminal by Mobile phone.
This test software was called "X-CALMON (extended Calibration and Monitor program)". X-
CALMON can support both calibration and test.
This test software includes EGSM, DCS, PCS and WCDMA-IMT band test.
2) X-CALMON Environment
H/W Environment
- PC with RS-232 Interface & GPIB card installed
- GSM/GPRS/EDGE/WCDMA Mobile Set
- Agilent 8960 Series 10 E5515C Instrument (E1987A above version A.05.28)
- Tektronix PS2521G Power Supply or Agilent A66311B
- ETC (GPIB cable, Serial cable, USB cable, RF cable, Power cable, Dummy battery)
S/W Environment
- National Instrument GPIB & VISA (version 2.60 runtime) driver install
- Agilent 8960 VXI driver(E1960) install
- X-CALMON EXE files
- OS : Window98, Window2000, WindowXP
- Serial port configuration
Baud rate: 115200 / Char length: 8bit / No Parity/ No Flow control / Stop bits: 1 bit
3) Configuration Diagram of Test Environment
LGE Internal Use Only
KF757
Figure 11-1. Calibration Configuration
- 210 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes