Removing The Main Drive Assembly - Canon LBP5050 Series Service Manual

Chapter 3
6) Remove the upper cover assembly. (page 3-3)[Removing the Upper
Cover Assembly]
7) Remove the main controller PCB. (page 3-11)[Removing the Main Con-
troller PCB]
8) Remove the low-voltage power supply assembly. (page 3-11)[Remov-
ing the Low-Voltage Power Supply Assembly]
9) Remove the DC controller PCB. (page 3-10)[Removing the DC Con-
troller PCB]

3.1.8.2 Removing the Main Drive Assembly

LBP5050N / LBP5050
1) Pull out the cartridge tray fully.
2) Remove the harness guide [1] in the direction of the arrow.
- Harness [2]
- 1 claw [3]
3) Remove the ITB fixing holder [1].
- 1 screw [2]
4) Remove the harness guide [1].
- 1 connector [2]
- Harness [3]
- 2 claws [4]
3-6
[2] [1] [3]
F-3-30
[2]
[1]
F-3-31
[4]
0018-7648
5) Remove the plate [1].
- 2 screws [2]
6) Free the flat cable [1] and the 2 harnesses [2] from the guide [3].
[3]
7) Remove the harness support plate [1] in the direction of the arrow.
- 2 screws [2]
[3] [1]
F-3-32
[1]
F-3-33
[3] [2] [3]
[1]
F-3-34
[4]
[2]
[2]