Getting Started; Overview; Installation; Connecting To Tv - MAG MAG250 Instruction Manual

High definition iptv set-top-box

page of 2

/ 2
Bookmarks

ABOUT YOUR MAG250 MICRO

About your MAG250 Micro

Thank you for purchasing of our product MAG250 Mcro, which makes it possible to possess access to TV and movies through your

digital television service.

You can control all functions of MAG250 Micro by using remote control for navigating on screen menu provided by your service

provider.

Getting Started

Please become acquainted in the next chapter how unpack and turn on power supply your MAG250 Micro.

In case of your product had been already adjusted for you by your provider look into "Use of Remote Control to control the device" for

information how to use the product.

UNPACKING AND INSTALLATION THE PRODUCT

After the product extraction out of the

with other objects as well. The power supply

package it is necessary to handle it with care,

cord is not to be laid under the carpets or

do not drop, shake it and afford other

blocked with anything where any damage

influence.

may not be noticed.

The product is designed for horizontal

Power supply unit

allocation onto flat surface.

The product should be used with power

Do not place the product onto slippery

supply unit provided by the manufacturer

surface, in place where it may be exposed to

only.

vibration or hazard to drop and other

The power supply unit is fitted out with plug

possible risks to the product to be damaged

which is intended for connecting to socket in

which may cause invalidation the product

your country usage. In case of the necessity in

guarantee.

the product connecting in other country or in

Do not dispose the product onto soft surface

the region with other data of electric circuit

like on the carpet, bed, etc., for such surfaces

the power supply unit adopted for use in the

cease access to the ventilation openings and

specified area should be received from the

complicate air flow that may cause to the

manufacturer.

product overheating and to invalidate

Operation

guarantee in result.

The outer power supply unit of the product is

Do not locate the product into the furniture

getting warm in operation. In case of outer

in case of vacant clearance around the

power supply unit gets hot, switch off

product is not provided for the sufficient

promptly and get in touch with the

product ventilation.

equipment supplier for its replacement.

Do not place the product in place where it

Protection from atmospheric electricity or

may be exposed to influence of direct

not using for a long time.

sunlight, next to the sources of open fire and

On coming the thunderstorm and also in case

convectors.

of the product is intended to be in no use for

Do not dispose the product on surfaces

a long time, disconnect the power supply

which in operating process may get warm, for

cord out of socket, switch off Ethernet, video

instance,

and audio cables.

video record player or intensifier and do not

It is to protect the product from thunder

put anything on the top of the shell as well.

discharges and power surges in the circuit..

Do not cover the product with anything.

Usage with Plasma Displays

Containing liquids objects, such as vase, plant

In the product usage for watching with

pot are not to be placed next to or on the

plasma screens do not pause the picture

product.

more than 5 minutes, otherwise it may cause

Do not touch or move the product during its

'burn-out' pixels on the screen. It is not

operation. Switch off the product if you need

considered as a defect of the product but

to shift it.

peculiarity of plasma screens structure. The

The product is intended for use indoors.

producer does not bear the responsibility for

damages had been caused in such manner.

The power supply cord is to be put to prevent

its deformation and jamming and touching it

The product and accessories are packed into recycled package and plastic bags. Please keep all the packing materials for the further transportation.

MAG250 Micro is delivered with the following accessories:

Audio/Video cable

Instruction manual

RCA - 3,5 mm TRRS

Batteries for IR Remote

Outer power supply unit

In case of absence of any of the specified accessories please refer to your services provider.

USING REMOTE CONTROL TO CONTROL THE DEVICE

This section explains how to unpack Remote Control (RC) and prepare it for

work.

Your service provider can supply the product with an alternative RC. In that

case please refer to the manual supplied by your service provider.

Inserting batteries

Remote Control requires two batteries type AA, R6, LR6, UM-3, 316, A316.

Inserting batteries into Remote Control.

Shift the battery cover located

Insert two batteries type AA

on back side of RC as shown

(included in package) taking care

in the picture.

to observe the correct polarity

as shown on RC.

Important information about using batteries

Do not mix different types of battery or old and new batteries.

Do not use rechargeable batteries with the remote control.

Remove the batteries from the remote control if you are not going to use it for

several weeks, to avoid the risk of leakage.

Please respect your environment and any local regulations and dispose of old

batteries in a responsible manner.

Caution! Do not attempt to recharge the batteries.

Immediately remove any leaking batteries. Take care when handling leaking

batteries as they may cause burns to the skin or eyes, or other physical injuries.

The Arrangement Designation

The product is designed to receive and record

TV pictures and sound signals. Any other use

is prohibited.

It means Telecommunication Technologies

insists on the product usage in entirely

accordant to the law of copyright. The

compliance with the specified laws leaves on

conscience of the user. The unauthorized

copying of the protected materials or

spreading of the specified copies under

definite conditions may violate the law of

possessor of the rights for the further

commercial use.

Updating Software

The product possesses the capability of

automatic software updating.

The manufacturer and your services provider

reserve the right for automatic software

updating to improve the product functional

capability.

During the software updating the product

should not be used for watching and

switched off until the complete software

updating.

During the software updating the product

switching off is inadmissible. The updating

takes several minutes and since then you are

able to continue enjoy on all delights of

digital television services.

IR remote control

АA-size 2pcs.

Your supplier optionally can provide the product with an alternative RC.

Remote Control

On/Off

"Picture in picture"

function

Switch windows

Favorites

Main menu

Exit

Replace the battery cover as

shown in the picture.

Back to previous

Average lifetime of a batteries

Additional information

is about 1 year.

Right

Left

Down

OK/Enter

Channel listing:

+FORWARD / -BACK

Rewind

Fast forward

Play / Pause

Stop

BACK PANEL MAG250 MICRO

Connecting on the Back Panel

Digital TV Connecting to the Network

MAG250 Micro receives TV channels and movies from the "digital TV" network.

Your services provider had been already installed the connection with the mentioned network.

• Connect cable for "digital TV" network into "digital TV"/Ethernet port on your product.

CONNECTING TO MAG250 MICRO

The typical product connecting to TV and audio intensifier is shown on the presented diagram:

CONNECTING TO TV-SET WITH HDMI CONNECTOR - BEST QUALITY

CONNECTING TO TV-SET (AUDIO/VIDEO INPUT) - GOOD QUALITY

Warning! Switch off all arrangements (TV, intensifier, etc.) and take power supply out of socket before connecting and

any cables disconnecting.

In case of the intensifier does not connected leave digital audio outlets of your product not connected.

Video Connecting

The product allows connecting the following video cables:

• HDMI – provides the best quality of picture and allows

playing of digital video of high definition (HD).

• Composite (CVBS) - enables standard picture quality.

Use the connection with the best quality which could be

applied with your equipment.

• In case of your TV has HDMI inlet, use HDMI cable for the

product connecting to TV through HDMI outlets.

• In case of your TV is capable to operate with connection

through component video inlet, use component video

cable for the product connecting to TV through

component video outlets.

Attention! In all cases follow coloration of

connectors and sockets on your equipment.

Remote Control with

additional programmable

section.

For convenience this RCU has additional section

Audio On/Off

of programmable buttons. You can program

these buttons, for example, to control your TV.

Set / Change time

RC has two LED lights to indicate of button

Record

presses and operational modes. The green

indicator lights when any button pressed on the

Service

base RC section. Red indicator is used to program

buttons from additional section.

TV programm guide

Programming the RC:

Change audio mode

To programm button from additional section

please do as follows:

Virtual keyboard

1. Press "SET" button and hold it for about 2

Context menu

seconds. When red indicator becomes

brighter the RC is ready to program.

Quick access TV

2. Press the button you want to program. Red

Additional

indicator starts blinking.

features

3. Dispose emitters of two RC opposite each

other at a distance 10 mm and press the

Page listing:

+ FORWARD / - BACK

button on the other RC to be used as a

Fast play

source for programming and hold it for 2

seconds.

Volume:

4. After three quick blinks red indicator will

+ MORE / - LESS

stop blinking. Now you can program next

button.

Change screen aspect

5. Please program all buttons you needed as

Delete symbol

described above.

6. Press "SET" button to save all programming

TV channell selection buttons

progress.

or keyboard for text

Connector:

HDMI

Cable:

HDMI

Video:

SD + HD

Audio:

digital

Connector:

CVBS, L, R

3x RCA - 3,5mm jack

Cable:

Video:

only SD

analog

Audio:

Composite video signal.

VIDEO IN

For video/audio connection

AUDIO IN

Audio Connecting

The product allows to conduct the following connections:

• Left and right channels for playing stereo sound through (L

and R outlets).

Attention! After the product unpacking please wait up

until the arrangement warms up to indoor

temperature to avoid condensation which may cause

short circuit.

On / Off

Programmable section

Setting menu

Audio On / Off

Additional function