Table of Contents
Advertisement
3.2
Gateway Mode configuration
1. Gateway mode is the default operating mode. If you are running a brand new system, you
don't have to make any change to be in this mode. Otherwise you can switch to Gateway
mode on operation mode page as following:
2. Configure the LAN settings
In Gateway mode, wireless router can be used as a DHCP server to assign IP address to PCs
on local network, either wired or wireless. It is recommended to use the default setting and
enable DHCP to avoid IP address conflict.
LEGUANG N900 Configuration Guide
ActForNet Technologies Copyright 2014
P a g e
| 7
Advertisement
Table of Contents
