ActForNet LEGUANG N900 Configuration Manual page 15

After you select the AP from the list, the Authentication field will be auto-populated
accordingly. You just need to type in the password that is supplied by your service provider.
After you click "Apply", the system will reboot to make the change take effect. If the setting
is correct, the wireless router should connect to the service provider access point like
following:
3. WAN setting
In wireless ISP mode, the WAN port refers to the logic port the wireless client uses to connect to
the service provider. In other words, the WAN port of the wireless router is the only port visible
from the service provider. Please keep it in mind that wireless router has NAT enabled by
ActForNet Technologies Copyright 2014
LEGUANG N900 Configuration Guide
P a g e | 15