Table of Contents
Advertisement
2.2
How to reset
In some cases, you may need to factory reset the system. For example, you forget your
password. After the system has boot up which takes about 1 minute, press the RESET button
which is located between the power supply plug and LEDs(see diagram above) for around 15
seconds before release it, the system will be reset after reboot with default configuration.
2.3
How to configure your PC for initial setup
The default IP address of the wireless router LAN port is 192.168.1.1. Since DHCP server on LAN
port is enabled by default. You can simply enable DHCP on the PC connecting to the LAN port of
the wireless router and the PC will get IP address automatically.
LEGUANG N900 Configuration Guide
ActForNet Technologies Copyright 2014
P a g e
| 4
Advertisement
Table of Contents
