Before Operation; Specification; Standard Accessories - Suzuki SE200-M SERIES Operation Manual

BEFORE OPERATION

1. SPECIFICATION OF MODEL SE200-MS FOR MEDIUM MATERIAL
Different points between SE200-MS and -MJ is a type of the cloth clamp and size of needle
a) Type of the cloth clamp
b) Size of needle
Other specifications are the same as below:
Items/Model
Stitch type
Sewing speed
Needle system
Buttonhole length
Stitch length
Taper bar length
Stitch width
Upper cloth clamp height
Type of buttonhole
Sewing selection
Power
Measurement
Weight

2. STANDARD ACCESSORIES

a) Instruction manual ---------------------------------------------------------------------------- 1
b) Parts list ------------------------------------------------------------------------------------------ 1
c) Tread guide stand ------------------------------------------------------------------------------ 1
d) Screwdriver (large) ---------------------------------------------------------------------------- 1
e) Threading bar ----------------------------------------------------------------------------------- 1
f) Machine cover ----------------------------------------------------------------------------------- 1
g) Oil can --------------------------------------------------------------------------------------------- 1
h) Foot switch --------------------------------------------------------------------------------------- 1
i) Control box --------------------------------------------------------------------------------------- 1
j) Accessories box including under items -------------------------------------------------- 1
- Spanner (size 8 – 10mm) ------------------------------------------ 1
- Tweezers ---------------------------------------------------------------
- Cleaning brush ------------------------------------------------------- 1
- Needle thread threading wire -----------------------------------
- Needle for model SE200-S is #90 ------------------------------
model SE200-J is #110 ----------------------------
- Knife for straight (size 35mm) ----------------------------------
- Cutting block for eyelet (size 35mm) --------------------------
- Cutting block for straight (size 35mm) -----------------------
- Blade for needle thread trimmer -------------------------------
- Safety cap -------------------------------------------------------------
- Needle thread tension spring (size φ1mm) ----------------
- Machine base fixing screw ＋washer ＋ nut --------------
- Control box fixing screw ------------------------------------------- 4
MODEL SE200-MJ FOR HEAVY/JEANS MATERIAL
: SE200-MS is equipped with flat type, see page 12.
SE200-MJ is equipped with wedge type, see page 12.
: SE200-MS is adjusted with needle size Schmetz system #90
SE200-MJ is adjusted with needle size Schmetz system #110
: Specification of model SE200-MS and SE200-MJ
: One (1) needle double-chain stitch
: 1,000 spm/min. ~ 2,000 spm/max.
: Schemetz system 558 #90 ~ #120
: 14mm ~ 40mm (without taper bar)
: 0.5mm ~ 1.5mm
: 4mm ~ 9mm
: 2.2mm ~ 3.2mm
: 10 ~ 12mm
: Eyelet and Straight buttonhole
: C/B, C/A, Sewing only, Cut only
: AC100V ~ 120V/5A or AC220V ~ 230V/3A, 1-phase, 50/60Hz, 200W
(See the serial number plate for actual voltage before operating)
: W300 x L500 x H460
: N/W 50kg
1
1
10
10
1
1
1
1
5
1
4 each (large and small washer = 4 each)
6