Manage Performance Activity; Manage Performance Screen; Dpi Selection; Sniper - Corsair Vengeance M60 User Manual

Manage Performance Activity

The Manage Performance activity allows you to control many of the parameters of the
advanced Avago sensor used in the Vengeance M60. Settings such as DPI, report rate, and
lift height can be tuned to match your gaming style and gaming surface, allowing you to
elevate your PC gaming to a new level.

Manage Performance Screen

DPI Selection

The Vengeance M60 gaming mouse can be assigned up to four simultaneous DPI settings:
three that can be selected on-the-fly, and one that is mapped to the "Sniper" button option
under Advanced Buttons.
By default, the three DPI levels are set to 800, 2400, and 5700 DPI. To set a new DPI, click
on the button you wish to change and move the slider to the DPI setting you wish to use.
You can set the DPI independently for the X and Y dimensions. This is very useful for wide
monitor setups (2 or 3 monitors in landscape mode), where you want to move quickly from
side to side, but don't need as much precision up and down. Experiment by clicking on the
checkbox to enable Independent X-Y DPI and adjust the values to suit your gaming setup
and style.

Sniper

The Vengeance M60 has a dedicated sniper button. The sniper function instantly lowers the
DPI of the sensor while it is being pressed, and then restores the prior DPI setting as soon
as it is released.
Set the DPI used by the sniper function by clicking Sniper and adjusting the slider to the
setting you wish to use.
Vengeance Gaming Software User GuidePage 23