Drying Time Button; Permanent Extra Rinse - AEG L 75480 WD User Manual

10 www.aeg.com
5.6 Time save button
Press the button
programme duration.
• Press one time to set 'Shortened dura-
tion' for items with daily soil.
• Press two times to set 'Extra Quick' for
items with almost no soil.
Some programmes accept only
one of the two functions.

5.7 Drying time button

Press this button to set the time that
suits the fabrics you have to dry. The dis-
play shows the set value.
Each time you press this button the time
value increases by 5 minutes.
You cannot set all time values for
different types of fabrics.
5.8 Automatic dry button 8
Press this button to set an automatic lev-
el of dryness for the laundry. The display
shows the symbol of the set level.
• Extra dry
• Cupboard dry
• Iron dry
You can not set all automatic lev-
els for each type of fabrics.

5.9 Permanent extra rinse

function
With this function you can keep the extra
rinse function permanently on when you
set a new programme.
• To activate the function press button
6 and button
until the display shows the symbol
• To deactivate the function press but-
ton
6
time until the symbol
5.10 Spin button
Press this button to:
• Decrease the maximum speed of the
spin phase when you set a pro-
gramme.
6 to decrease the
5 at the same time
and button at the same
5
goes off.
9
6
• Deactivate the spin phase.
• Activate the 'Rinse Hold' function. Set
this function to prevent fabric creases.
The appliance does not drain the wa-
ter when the programme is comple-
ted.
7
5.11 Temperature button
Press button
temperature.
- -
5.12 Acoustic signals function
You can hear the acoustic signals when:
• You activate the appliance.
• You deactivate the appliance.
• You press the buttons.
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic sig-
nals, press button
the same time for 6 seconds.
5.13 Child lock function
This function prevents children to play
with the control panel.
.
• To activate the function, press button
10
until the display shows the symbol
• To deactivate the function, press but-
ton
time until the symbol
You can activate the function:
• Before you press the Start/Pause but-
ton
The display shows only the spin
speeds available with the set
programme.
Spin phase is off.
'Rinse Hold' function is
on.
to change the default
10
= cold water
and button
8
If you deactivate the acoustic sig-
nals, they continue operate only
when you press the buttons and
when a malfunction occurs.
and button 9 at the same time
and button at the same
10 9
4 : the appliance cannot start.
10
at
7
.
goes off.