Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for AEG L 75270 FL
Summary of Contents for AEG L 75270 FL
- Page 1 L 75270 FL WASHING MACHINE USER MANUAL L 75470 FL L 75670 FL...
-
Page 2: Table Of Contents
CONTENTS 4 SAFETY INFORMATION 6 ENVIRONMENT CONCERNS 7 TECHNICAL INFORMATION 8 PRODUCT DESCRIPTION 8 ACCESSORIES 9 CONTROL PANEL 12 PROGRAMMES 15 BEFORE FIRST USE 15 USING THE APPLIANCE 15 LOADING THE LAUNDRY 16 FILLING THE DETERGENT AND ADDITIVES 17 SETTING AND STARTING A PROGRAMME 18 AT THE END OF THE PROGRAMME 20 HELPFUL HINTS AND TIPS 22 CARE AND CLEANING... - Page 3 ENGLISH FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
-
Page 4: Safety Information
SAFETY INFORMATION Before the installation and use, read this manual carefully: • For your safety and the safety of your property • To help the environment • For the correct operation of the ap- pliance. Always keep these instructions with the appliance also if you move or give it to GENERAL SAFETY a different person. -
Page 5: Water Connection
ENGLISH internal components and cause leak- • Always use a correctly installed ages or malfunctions. shockproof socket. • Do not install and connect a dam- • Do not use multiple plugs and exten- aged appliance. sion cables. There is a risk of fire. •... -
Page 6: Environment Concerns
ENVIRONMENT CONCERNS • Always start a washing programme PACKAGING MATERIALS with the maximum load of laundry. Recycle the materials with the symbol • If necessary, use a stain remover when you set a programme with a Put the packaging in applicable con- low temperature. -
Page 7: Technical Information
ENGLISH TECHNICAL INFORMATION Dimensions Width / Height / Depth 605 / 850 / 605 mm Total depth 640 mm Electrical connection: Voltage 230-240 V Overall power 2200 W Fuse 10 A Frequency 50 Hz Level of protection against ingress of solid particles IPX4 and moisture ensured by the protective cover, except where the low voltage equipment has no protection... -
Page 8: Product Description
PRODUCT DESCRIPTION Worktop Feet for the appliance level Detergent dispenser Water drain hose Control panel Water inlet valve Door handle Mains cable Rating plate Transit bolts Drain pump Feet for the appliance level ACCESSORIES Spanner To remove the transit bolts. Plastic caps To close the holes on the rear side of the cabinet after the removal of... -
Page 9: Control Panel
ENGLISH CONTROL PANEL Cottons + Prewash Extra Silent Synthetics + Prewash Easy Iron Delicates Wool/Silk On/Off On/Off button Time saving button Programme knob Extra rinse button Display Stain button Start Pause button Spin reduction button Delay start button Temperature button Press button to activate the appli- ON/OFF BUTTON... -
Page 10: Delay Start Button
• The display symbols. Symbols Description Washing phase Rinse phases Spin phase Child lock You cannot open the appliance door when the symbol is on. You can open the door only when the symbol goes off. If the programme is completed but the symbol stays on: •... -
Page 11: Acoustic Signals
ENGLISH ACOUSTIC SIGNALS EXTRA RINSE BUTTON FUNCTION Press button to add rinsing phases You can hear the acoustic signals when: to a programme. Use this function for persons allergic to • You activate the appliance. detergents and in areas where the wa- •... -
Page 12: Programmes
PROGRAMMES Programme Type of load Cycle Functions Temperature max. weight of load description Cottons White and coloured Wash SPIN REDUCTION 95° - Cold cotton with normal Rinses RINSE HOLD soil. Long spin STAIN max. 7 kg EXTRA RINSE TIME SAVE Cottons + pre- White and coloured Prewash... - Page 13 ENGLISH Programme Type of load Cycle Functions Temperature max. weight of load description All fabrics Drainage of the SPIN REDUCTION Spin / Drain The maximum load water NO SPIN of the laundry is rela- Spin phase at the ted to the type of maximum speed.
-
Page 14: Consumption Values
3) The default phase of the spin speed is related to cotton items. Set the spin speed. Make sure that it agrees with the laundry. 4) Set this function to add rinses. With a low spin speed the appliance performs delicate rinses and a short spin. -
Page 15: Before First Use
ENGLISH BEFORE FIRST USE 1. To activate the drain system, put 2 detergent dispenser. Set and start litre of water in the main wash com- a programme for cotton at the partment of the detergent dispens- highest temperature without laun- dry. -
Page 16: Filling The Detergent And Additives
FILLING THE DETERGENT AND ADDITIVES The detergent compartment for the prewash phase and the soak programme. Add the detergent for prewash and soak before the start of the programme. The detergent compartment for the washing phase. If you use a liquid detergent, put it immediately before you start the programme. -
Page 17: Setting And Starting A Programme
ENGLISH 3. To use powder detergent, turn the flap up. 4. To use liquid detergent, turn the flap down. With the flap in the position DOWN: – Do not use gelatinous or thick liquid detergents. – Do not put more liquid deter- gent than the limit showed in the flap. -
Page 18: At The End Of The Programme
CHANGE A FUNCTION 2. Press button again and again until the display shows 0’. You can change only some functions 3. Press button . The programme before they operate. starts. 1. Press button . The indicator flashes. OPEN THE DOOR 2. - Page 19 ENGLISH To drain the water: 4. Deactivate the appliance. 1. If necessary, decrease the spin The appliance drain and spin speed. automatically after approximate- 2. Press the Start/Pause button ly 18 hours. The appliance drain the water and spin. 3. When the programme is comple- ted and the door lock symbol goes off, you can open the door...
-
Page 20: Helpful Hints And Tips
HELPFUL HINTS AND TIPS THE LAUNDRY LOAD DETERGENTS AND ADDITIVES • Divide the laundry in: white, col- • Only use detergents and additives oured, synthetics, delicates and wool. specially made for washing machines. • Obey the washing instructions that • Do not mix different types of deter- are on the laundry care labels. - Page 21 ENGLISH Water hardness table Water hardness Level Type °dH °T.H. mmol/l Clarke soft 0-15 0-1.5 medium 8-14 16-25 1.6-2.5 10-16 hard 15-21 26-37 2.6-3.7 17-25 very hard > 21 > 37 >3.7 >25...
-
Page 22: Care And Cleaning
CARE AND CLEANING WARNING! CAUTION! Do not use alcohol, solvents or chemical products. Disconnect the appliance from the mains supply before you clean it. MAINTENANCE WASH DESCALING With the low temperature programmes it is possible that some detergent stays The water we use contains limescale. If in the drum. -
Page 23: Detergent Dispenser
ENGLISH DETERGENT DISPENSER To clean the dispenser: 1. Press the lever. 2. Pull the dispenser out. 3. Remove the top part of the liquid additive compartment. 4. Clean all the parts with water. 5. Clean the dispenser recess with a brush. - Page 24 To clean the drain pump: 1. Open the drain pump door. 2. Pull the flap out to remove it. 3. Put a container below the recess of the drain pump to collect the water that flows out. 4. Press the two levers and pull for- ward the drainage duct to let the water flow out.
-
Page 25: Emergency Drain
ENGLISH 9. Clean the filter under the water tap and put it back in the pump into the special guides. 10. Make sure that you tighten correct- ly the filter to prevent leakages. 11. Put the flap back and close the drain pump door. -
Page 26: Frost Precautions
When you drain the water with the 2. Close the water tap. emergency drain procedure, you must 3. Remove the water inlet hose activate again the drain system: 4. Put the two ends of the inlet hose 1. Put 2 litres of water in the main in a container and let the water wash compartment of the deter- flow out of the hose. -
Page 27: Troubleshooting
ENGLISH TROUBLESHOOTING The start of the appliance does not oc- • - The appliance does not drain cur or it stops during operation. the water. First try to find a solution to the prob- • - The appliance door is open or lem (refer to the table). - Page 28 Problem Possible cause Possible solution The anti-flood de- • Disconnect the appliance. vice is on. • Close the water tap. • Contact the service centre. The spin phase The spin phase is off. Set the spin programme. does not operate. The filter of the drain Clean the filter of the drain pump is blocked.
- Page 29 ENGLISH Problem Possible cause Possible solution The appliance fills The end of the drain Make sure that the drain hose is with water and hose is too low. in the correct position. drain immediately. The washing re- The detergent you used Increase the detergent quantity sults are not satis- was not sufficient or cor-...
-
Page 30: Installation
INSTALLATION UNPACKING 1. Use the gloves. Remove the exter- nal film. If necessary, use a cutter. 2. Remove the cardboard top. 3. Remove the polystyrene packaging materials. 4. Remove the internal film. 5. Open the door. Remove the poly- styrene piece from the door seal and all the items from the drum. - Page 31 ENGLISH 6. Put the front piece on the floor be- hind the appliance. Carefully put down the appliance with the rear side on it. Make sure not to dam- age the hoses. 7. Remove the polystyrene protection from the bottom. 8.
-
Page 32: Positioning And Levelling
12. Replace the plastic spacers with the plastic caps. You can find these caps in the user manual bag. WARNING! We recommend that you keep Remove all the packaging and the packaging and the transit the transit bolts before you in- bolts for when you move the ap- stall the appliance. -
Page 33: Water Pressure
ENGLISH Installation on a not hard floor tach it to the beams of the floor with minimum 2 screws. When you install the appliance on a not The plinth must extend of some cm hard floor (wooden planks floor), put a more than the edges of the appliance. -
Page 34: Water Drainage
Water-stop device The inlet hose has a water stop device. This device prevents water leaks in the hose because of its natural ageing. The red sector in the window «A» shows this fault . If this occur, close the water tap and contact the service centre to replace the hose. - Page 35 ENGLISH • If the end of the drain hose is this (see the drawing), you can push it di- rectly into the stand pipe. Without the plastic hose guide. • To a sink spigot. Refer to the illustration. Put the drain hose in the spigot and tighten it with a clip.
- Page 36 132939750-A-112011...