Wireless Network Setup - Samsung 650 User Manual

I Wireless Network Setup
~
The menu is activated only if the Samsung Infolink Wireless adapter is connected. (See page 91)
Auto Setup
~
If you connect the LAN cable and it supports DHCP, the Internet Protocol (IP)
Settings are automatically configured.
~
The wireless IP sharer to be connected to this product must support DHCP.
1 Press the MENU button to display the menu.
Press the
&
or " button to select Setup, then press the ENTER button.
2 Press the
&
or " button to select Wireless Network Setup, then press the ENTER
button.
3 Press the ENTER button to select Internet Protocol Setup.
4 Press the
&
or " button to select Auto Setup, then press the ENTER button.
~
The Internet Protocol is set automatically.
">
Select Access Point Select to check the network connectivity.
(Refer to page 95)
Press the EXIT button to exit.
Manual Setup
1 Press the MENU button to display the menu.
Press the
&
or " button to select Setup, then press the ENTER button.
2 Press the
&
or " button to select Wireless Network Setup, then press the ENTER •
G'
button.
3 Press the ENTER button to select Internet Protocol Setup.
4 Press the
&
or " button to select Manual Setup, then press the ENTER button.
5 Press the
&, ", ...
or • button to move to an item, and press the numeric button to
configure the selected item. Press the ENTER button.
~
If you want to use a static IP address, refer to the user manual of your wireless IP
sharer.
~
Select Access Point Select to check the network connectivity.
(Refer to page 95)
Press the EXIT button to exit.