Using The Remote Control Backlight Buttons; Using The Tools Button; Memorizing The Channels - Samsung 650 User Manual

I
Using the Remote Control Backlight Buttons
Use this feature in dark surroundings and when you are unable to see the remote control buttons clearly.
1 Press the ON/OFF
0
light button
~
Pressing the ON/OFF
0
light button toggles between ON and OFF.
>-
When ON, the button backlight is turned on for a moment.
~
Pressing a remote control button when the remote control is on turns the button backlight on for a moment. If
you touch or move the remote control and the motion is detected by the sensor of the remote control, the button
backlight will be turned on for a moment.
~
The remote contains two small movement sensors that control the backlight function. If you shake or drop the
remote, you may hear the sensors rattle. This is normal and is not a defect.
~
The button backlight will not be turned on when the remote control is turned off.
Using the TOOLS Button
You can use the TOOLS button to select your frequently used functions quickly and easily. The TOOLS menu
changes depending on which external input mode you are viewing.
1 Press the TOOLS button.
The TOOLS menu will appear.
2 Press the
.t"
button to select a menu, then press the ENTER button.
3 Press the
.t"
t...
/~
tENTER buttons to display, change, or use the selected
items. For a more detailed description of each function, refer to the
corresponding page.
• Device List, see page 102
• Multi-Track Sound, see page 38
• Picture Mode, see page 23
• Sound Mode, see page 36
• Sleep Timer, see page 55
• Add to Favorite, see page 43
• Switch to Cable(or Switch to Air), see pages
20-21
• PIP: see pages 34-35
• Auto adjustment: see page 50
Memorizing the Channels
Your TV can memorize and store all of the available channels for both air and cable channels. After the available
channels are memorized, use the CH
[-;;;:-1
or CH
Cvj
button to scan through the channels. This eliminates the need
to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a
broadcast source, memorizing the channels (automatic) and adding and deleting channels (Channel Lists).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must
specify the type of signal source that is connected to the TV (i.e. an Air or a Cable
system).
1 Press the MENU button to display the menu.
Press the. or " button to select Channel, then press the ENTER button.
2 Press the ENTER button to select Antenna.
Press the. or " button to select Air or Cable, then press the ENTER button.
Press the EXIT button to exit.
Continued...
English· 20