Samsung 650 User Manual page 54

Setting the On/Off Timer
Use this feature to set the TV to turn on or off at a desired time. You must set
the clock first.
1 Press the MENU button to display the menu.
Press the. or T button to select Setup, then press the ENTER button.
Press the. or T button to select Time, then press the ENTER button.
2 Three different On/Off Timer Settings can be made.
Press the • or T button to select Timer1, Timer2,or Timer3, then press the
ENTER button. The timer menu is displayed.
Press the. or T button to adjust hour, then press the
~
button to move to the
next step. Set other items using the same method as above.
3 Press the'" or
~
button to select the desired item below.
Press the. or T button to adjust the setting.
Press the EXIT button to exit.
• On Time: Set the Hour, Minute, am/pm, and Activation/lnactivation.
(To activate timer with the setting you've chosen, set to Activate.)
• Off Time: Set the Hour, Minute, am/pm, and Activation/Inactivation.
(To activate timer with the setting you've chosen, set to Activate.)
• Volume: Set the desired volume level.
• Contents: When the On Time is activate, you can turn on a specific channel or
play back contents such as photo or audio files.
- TV/USB: Select TV or USB. (Make sure that an USB device is connected to
your TV.)
- Antenna: Select Air or Cable.
- Channel: Select the desired channel.
- Music: Select the folder containing MP3 files on the USB device.
- Photo: Select the folder containing JPEG files on the USB device.
• Repeat: Select Once, Everyday, Mon-Fri, Mon-Sat, Sat-Sun, or Manual.
)0>-
When Manual is selected, Press the
~
button to select the desired day of the
week. Press the ENTER button over the desired day and the mark
(vi)
will
appear.
..
_
_
-
_-_
_
---- ..
_
__
_
_._ _
__
..
}o>
You can set the hour, and minute directly by pressing the number buttons on
the remote control.
}o>
Auto Power Off
When you set the timer On, the television will eventually turn off, if no
controls are operated for 3 hours after the TV was turned on by timer.
This function is only available in timer On mode and prevents overheating,
which may occur if a TV is on for too long time.
Continued...