Option Setting - Sanyo CE29FS2 Service Manual

Option Setting

After replacing the Memory IC (IC802)
The memory IC (IC802), stores the option data of TV set and service adjustments data for each circuit, therefore,
when the memory IC is replaced, it should be programmed to the following settings and " SERVICE ADJUSTMENT"
on pages 15 to 16.
1) To enter to the Option Mode
Press and hold the MENU on the remote control and Programme down button (CHM) on the front panel of
the TV. The option window will appear on the screen.
MENU
TV/AV MENU - +
2) To set the Option Mode
Select the desired option item by pressing the Programme down or up button.
To switch the option mode, use the Level up or down button.
The data which is set in the option mode is stored into the memory IC automatically.
The following table shows the available option items and default setting mode.
Option Mode
PLUG & PLAY
WELCOME TEXT
AUTO VOLUME
TEXT NO SIGNAL
AFC
3) Exit from the Service Mode
Press the Menu button or turn off the TV set by using the mains switch.
CH
Mode
ON or OFF
ON or OFF
ON or OFF
ON or OFF
ON or OFF
OPTION
PLUG & PLAY
WELCOME TEXT
AUTO VOLUME
TEXT NO SIGNAL
AFC
HOTEL MODE
Description & Note
Plug & Play mode, default "ON"
Display message when first set up, default "OFF"
Auto volume, default "OFF"
When no received signal, execution, default "ON"
Automatic Frequency Control (AFC) available, default "ON"
-9-
ON
OFF
OFF
ON
ON
Option Mode
OFF