Epson EB-536Wi User Manual page 63

Interactive Feature Modes
a
 When you use multiple displays with Windows 7 and use interactive
features on the secondary display, make the following settings:
- Set the Pen Operation Mode setting to One User/Pen in the Easy
Interactive Function setting in the projector's Extended menu.
- Go to Control Panel > Hardware and Sound > Table PC Settings
> Setup to launch the setup program and configure the interactive
features.
If you set up a third display, you cannot use interactive features with
that display.
You cannot write or draw across multiple screens.
 To use computer interactive mode over a network, you need to
install EasyMP Network Projection version 2.85 or later (for
Windows) or 2.83 or later (for OS X), or Quick Wireless version
1.32 or later.
a
If you are using OS X, install the Easy Interactive Driver on your
computer the first time you use the interactive features.
"Easy Interactive Driver System Requirements (OS X only)"
s
p.65
"Installing Easy Interactive Driver on OS X"
s
b
Connect the projector to your computer using a USB cable.
a
You do not need a USB cable when using computer interactive
mode over a network.
s "Using the Interactive Features over a Network"
c
Turn on the projector.
d
Project your computer's desktop.
e
Press the [Menu] button, select the Extended menu, and press
the [Enter] button.
f
p.65
p.80
g
 When projecting using a computer cable or over a network, select
Select the USB Type B setting and press the [Enter] button.
Select one of the following:
Easy Interactive Function.
63