Epson EB-536Wi User Manual page 128

List of Functions
Submenu
SSID Auto Set- (This can only be set if Connection Mode is set to Quick.)
ting
Set to On to speed up the projector search.
Set to Off when connecting to multiple projectors at the same
time.
This is set to On by default.
(This item can only be set when SSID Auto Setting is set to
SSID
Off.)
Enter an SSID
system in which the projector participates, enter the SSID.
You can enter up to 32 single-byte alphanumeric characters (^
can only be entered from the Web browser). If the SSID is left
blank or set to ANY, an ANY connection (selects a connection
from local access points without specifying an SSID) is
established.
When Connection Mode is set to Advanced, you can search for
Search Access
surrounding access points, and set the SSID to be connected from
Point
those access points. Depending on the access point settings, they
may not be displayed in the list. You must set security separately.
Function
g
. When an SSID is provided for the wireless LAN
Submenu
IP Settings (This item can only be set if Connection Mode is set to
Advanced.)
You can make network settings.
DHCP: Set to On to make network settings using DHCP
is set to On, you cannot set any more addresses.
IP Address: You can input the IP address
projector. You can enter a number from 0 to 255 in each field of
the address. However, the following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Subnet Mask: You can input the subnet mask
You can enter a number from 0 to 255 in each field of the address.
However, the following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway Address: You can input the IP address for the gateway
for the projector. You can enter a number from 0 to 255 in each
field of the address. However, the following Gateway addresses
cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
SSID Display To prevent the SSID
screen, set this to Off.
To prevent the IP address
IP Address Dis-
Standby screen, set this to Off.
play
Function
g
. If this
g
assigned to the
g
for the projector.
g
from being displayed on the LAN Standby
g
from being displayed on the LAN
128
g