Table of Contents
Advertisement
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999
CHARGE YOUR BATTERY
Before using your phone for the first time or after a long period without use, it is
important to charge the battery for at least 24 hours.
Plug the connector into the socket in the base of the
phone, then plug the transformer unit into a mains
AC power socket. In normal operation, the battery is
fully charged when the bars in the battery symbol
stop moving.
Note: if the battery is completely discharged, the battery icon indicating the
charge status will only appear 2 or 3 minutes after you connect the charger.
We recommend to always discharge completely the battery before recharging.
CARRY STRAP
The Carry Strap included in the box can be fixed
and removed as shown beside.
SWICH ON YOUR PHONE
•
Press and hold the
•
Enter the PIN code of your SIM Card
(code provided together with the SIM Card)
If you make a mistake, use the
short press: clear the last digit
-
long press: clear the complete entry
-
•
Press
(OK) to confirm
The phone is ready to be used when a network
name is displayed.
Note: if you enter a wrong PIN code 3 times in succession, your SIM
Card is blocked and you must enter the PUK code to unblock it (see
section 5. Problem Solving / Helpful Hints on page 28).
key
(Clear) key:
Getting Started
Enter
PIN
****
OK
SOS
(Network Name)
Menu
Mem
3
Advertisement
Table of Contents
