Call Waiting, Call Hold And Multiparty Calls; Active Call(S) And Waiting Call; To Put An Active Call On Hold To Make A Second Call - Kyocera IRIDIUM KI-G100 User Manual

Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999

CALL WAITING, CALL HOLD AND MULTIPARTY CALLS

The GSM services "Call Waiting" and "Call Hold" allow you to put an active call
on hold to be able to answer a waiting call or initiate a new call. The "Call
Waiting" function can be activated in menu "43 Waiting". If this function is
disabled, you will not be notified of a waiting call. A second caller will either hear
the busy tone or their call will be diverted according to the set diversion. If the
function is enabled, the caller will hear the ringing tone and you will be also
notified.
The "Multiparty" (Mtpy) service allows you to speak to up to 5 other parties on
the same call.

Active call(s) and waiting call

One or more calls are active and a new one is waiting (indicated by a signal tone
through the earpiece and red light on top of the phone blinking):
•
Press to end all active and held calls and
then to accept the new call,
or
•
Press (Menu) to access the Call Waiting
Menu
•
Select with (5 6):
Answer to answer the waiting call, thus putting on hold the active ones
Replace to hang up all active calls and accept the new one
to reject the waiting call. Their call will be dropped.
Reject
I am busy to let the waiting caller hear the busy tone or let their call
being diverted if the diversion When Busy has been set
to leave the Call Waiting Menu
Quit
•
Press (OK) to confirm

To put an active call on hold to make a second call

•
Press (Menu) to access the In-Call Menu
•
(5 6) the option "Hold"
Select with
•
Press (OK) to confirm
•
Dial a number and make the second call
10 Extra Dialling Services
Call 2/2
Waiting
+491795905001
1m32
Menu Mem
Call
Active
02159918396
1m54
Menu Mem