Table of Contents
Advertisement
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Version - 01.1999
21 Text
1 Read new
• Scroll in the message with
• Press
(Menu) to access the Message Menu and select
1 Read Next (appears only if there is at least one other to read)
2 Edit
3 Reply
5 Extract
6 Erase
7 Info
2 Read all
3 Create
• Enter a message (max. 160 characters)
To enter a letter, press a key several times until the desired
-
letter appears (see keypad allocation page 29)
Use
-
If you make a mistake, use the
-
• Press
(OK) and enter a destination number
•
to access the Create Message Menu and select:
1 Save
2 Send
4 Settings
1 Msg Centre tel no. of the network unit which routes the messages
2 Reply Path
3 Valid per
22 Broadcast
1 Read new
•
Scroll in the message with
•
Press
(Menu) to access the Message Menu and follow the same
procedure as in previous section
2 Read all
3 Configuration
read all unread message(s) that have been received:
(5 6)
to edit the message (see next section)
to reply to the message's sender (see next section)
to extract the number included in the message
to erase the message
to display additional information about this message
read all messages: same procedure as above
write a new message:
(A/a) to toggle between upper- and lowercase
- short press: clear the last character
- long press: clear the complete entry
to save the message first
to send the message first
changing of message control settings:
let the answer to your message be prepaid
set the validity duration for not transmitted message
read unread message(s) sent by the network
(▲ ▼)
read all messages: same procedure as above
select the type and language of the messages to be
Menus
(Clear) key:
17
Advertisement
Table of Contents
