Operation Guide To Ehs350A Cut-Off Saw; Before Starting - Princess auto EHS350A Operation And Parts Manual

Operation Guide to EHS350A cut-off saw

1. Before starting

Preparation includes clear up and arrangement of work surroundings, wearing proper
clothing and protection and inspecting of the cut-off saw. In preparation, please follow
the procedures described in the appropriate section of this manual. For additional
preparation work before starting, please follow instructions given below:
. Fueling:
a) Before starting, check if there is any fuel left in the fuel tank.
b) This engine is engineered to operate on mixture of unleaded gasoline and quality
two-stroke engine oil. Octane rating of the gasoline should at least be 93.
c) Gas to Oil mix ratio is 50:1.
d) When mixing fuel, pour engine oil into the canister first, and then add gasoline
(make sure the mix ratio is 50:1). Shake the mixture in the canister thoroughly.
Clean the fuel tank cap and the area around it as necessary to ensure no dirt falls
into the tank. Finally pour the fuel mixture into the tank and tighten fuel tank cap
securely.
23