Location Of Controls; Adjusting The Ringer Volume; Connecting A Communication Device - Panasonic KX-T7710 Quick Reference Manual

The KX-T7710 has two modes, NORMAL Mode and Panasonic PBX Mode*.
Please use the corresponding side of the Telephone Card depending on the mode.
*The PBX Mode may not be available depending on the model of the Panasonic KX series Business
Telephone Systems to which you are connected.
For more detail, please consult your dealer.
NORMAL mode PBX mode
4
3
2
1
Confirming the Mode
You can confirm the current mode by the position of the Mode switch
lever (at the bottom of the unit). [Default: NORMAL]

Adjusting the RINGER Volume

Adjust the RINGER volume selector lever (at the bottom of the unit) to
the desired setting. (
[Default: MIDDLE]

Connecting a Communication Device

To connect a communication device such as a computer modem
to the telephone line, please use the DATA PORT (at the right
side of the unit). RJ11 modular jack is available.

Location of Controls

NORMAL Mode
Message/Ringer Lamp: Flashes when you receive a call or when
someone has left you a message.
One-touch Buttons (M1-M5): Used to
access a feature or as a speed dialling
button.
PAUSE: Used to insert a pause when
storing a telephone number.
AUTO: Used for Personal Speed dialling.
PROGRAM: Used to enter the
programming mode.
MESSAGE: Used to call back the party who left the message
waiting indication.
Handset Volume Control Buttons: Used to adjust the handset volume.
FLASH/RECALL: Used to send a recall signal in order to access a
PBX feature (e.g., Hold, Transfer, or Three-party Conference).
8
REDIAL: Used to redial the last dialled number.
7
6
Telephone Card: Has two sides (NORMAL mode, PBX mode).
5
– LOW, – MIDDLE, – HIGH)
– 6 –
PBX Mode
One-touch Buttons
(1-8): Used as preset
feature buttons set at
the Panasonic KX series
Business Telephone
Systems; you do not
need to program at your
extension.
DATA PORT