Pan/Tilt Operation - Sony EVI-D100 Operating Instructions Manual

Pan/Tilt Operation

1
CAMERA SELECT
STD
HOME
L/R DIRECTION
SET
1
Press the POWER switch.
The camera will turn on,
performing the pan/tilt reset
action automatically.
2
Press the arrow button to change
the directions of the camera head.
While checking the picture on the
screen, press the desired arrow
button.
To move the camera little by
little, press the button just for a
moment.
To move the camera in a wide
range, press and hold down the
button.
To move the camera diagonally,
press the arrow button (
while holding down the arrow
button ( or
To face the camera back to
the front
Press the HOME button.
REV
2
PAN-TILT
RESET
or )
).
If you accidentally move the
camera head with your hand
Release the camera head immediately
to let it return to the previous position
automatically. If you move the camera
head and hold it over a prolonged
period, the camera's power turns off.
To turn it back on, press the POWER
switch on the Remote Commander.
When the camera is facing in
the wrong direction
The camera is preset to face toward
the right whenever the arrow ( )
button is pressed. You might wish to
face the camera toward the opposite
direction from that of the button you
pressed. In such a case, you can
change the direction of the camera
while checking the picture on the
screen. To do so, press the REV
button while holding down the L/R
DIRECTION SET button.
To reset that setting, press the STD
button while holding down the L/R
DIRECTION SET button.
Arrow Movement of
button the camera
Basic Operations
Setting
L/R
DIRECTION SET
While holding down
STD
1
Press
L/R
DIRECTION SET
While holding down
REV
2
Press
43