Transport And Shipping Of Amplifier - Hegel H200 User Manual

High end integrated amplifier
Table of Contents

Advertisement

TRANSPORT AND SHIPPING OF AMPLIFIER

If you are packing the amplifier for shipping please follow these instructions to secure the volume and
source knobs are not damaged in transport:
1. Put the plastic bag around the amplifier from the front panel side of the amplifier. Leave about
10cm (4 inches) of open room between bottom end of plastic bag and volume and source knobs,
making sure the plastic bag bottom end will not touch the knobs during transport.
2. Insert the amplifier in the two white shock absorbers, one in the left-hand side and one in the right-
hand side of the amplifier. This is the recommended procedure to fit the shock absorbers: first put
the left-hand side shock absorber down on the floor. Then put the plastic bag into the shock
absorber with the opening facing upwards. Hold the amplifier firmly in the middle of the front
panel and the middle of the back panel and be careful to not hold around the volume and source
knobs. Put the amplifier down into the plastic bag and Left-hand side shock absorber. Close the
plastic bag around the amplifier. Then put the right hand shock absorber on top of the Right-hand
side of the amplifier.
3. Insert the amplifier into the cardboard box. Be careful to not hold around the volume and source
knobs when putting the amplifier in the cardboard box.
4. Make sure the plastic bag is still loose around the volume and source knobs to avoid any damage to
the knobs during transport.
CLEANING
The top cover, side panels and knobs are made of brushed / blasted and anodized aluminium, while the
front panel is made of solid, powder coated aluminium. Fingerprints or stains on the front panel, knobs
or top cover can be removed with a cloth moistened with warm water or with a mild detergent suitable
for cleaning mirrors and bathroom.
We have found that the detergent Bio-Tex OXI effect supplied in an orange plastic spray can is
working particularly well in cleaning the front panel, top cover and side panels.
We wish you good luck in setting up and connecting your new amplifier and hope that it will give you
many years of joyful natural sounding music experiences!

Advertisement

Table of Contents
loading

Table of Contents