Replacing The Speakers; Procedure; Post-Requisites - Dell Inspiron 20 Service Manual

Replacing the Speakers

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.

Procedure

1 Align the screw holes on the speakers with the screw holes on the display
bezel.
2 Replace the screws that secure the speakers to the display bezel.
3 Route the speaker cable on the display bezel and secure it with the tape.
4 Connect the speaker cable to the system board.
5 Slide the power-status light cable into the power-status light board
connector and press down on the connector latch to secure the cable.
6 Adhere the power-status light cable to the speaker.

Post-requisites

Follow the instructions from step 3 to step 5 in "Replacing the
36
Computer. After working inside your
After Working Inside Your
Back Cover".