Replacing The Wireless Card; Procedure; Post-Requisites - Dell Inspiron 20 Service Manual

Replacing the Wireless Card

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.

Procedure

CAUTION: To avoid damaging the wireless card, do not place any
cables under it.
1 Align the notch on the wireless card with the tab on the wireless-card
slot.
2 Slide the wireless card at an angle into the wireless-card slot.
3 Press the other end of the wireless card down and replace the screw that
secures the wireless card to the system-board bracket.
4 Connect the antenna cables to the wireless card.
The following table provides the antenna-cable color scheme for the
wireless card supported by your computer.
Connectors on the wireless card
Main (white triangle)
Auxiliary (black triangle)

Post-requisites

Follow the instructions from step 3 to step 5 in "Replacing the
30
Computer. After working inside your
After Working Inside Your
Antenna-cable color
White
Black
Back Cover".