Motorola Symbol DS3408 Product Reference Manual page 25

Beeper Definitions (Continued)
Table 2-1
Beeper Sequence
Macro PDF
2 long low beeps
3 long low beeps
4 long low beeps
5 long low beeps
Fast warble beep
Lo/Hi beeps
ADF Programming: Normal Data Entry. Duration of tones are short.
Hi/Lo beeps
Lo/Lo beeps
Hi/Hi beeps
Hi/Lo/Hi/Lo beeps
Hi/Lo/Lo beeps
Low beep
Lo/Hi/Hi beeps
ADF Programming: Error Indications. Duration of tones are very long.
Lo/Hi/Lo/Hi beeps
Lo/Hi/Lo beeps
Lo/Hi beeps
File ID error. A bar code not in the current MPDF sequence was
scanned.
Out of memory. There is not enough buffer space to store the
current MPDF symbol.
Bad symbology. Scanned a 1D or 2D bar code in a MPDF
sequence, a duplicate MPDF label, a label in an incorrect order, or
trying to transmit an empty or illegal MPDF field.
Flushing MPDF buffer.
Aborting MPDF sequence.
Flushing an already empty MPDF buffer.
Enter another digit. Add leading zeros to the front if necessary.
Enter another alphabetic character or scan the End of Message
bar code.
Enter another criterion or action, or scan the Save Rule bar code.
Rule saved. Rule entry mode exited.
All criteria or actions cleared for current rule, continue entering rule.
Delete last saved rule. The current rule is left intact.
All rules are deleted.
Out of rule memory. Erase some existing rules, then try to save rule
again. (It is not necessary to re-enter the current rule.)
Cancel rule entry. Rule entry mode exited because of an error or the
user asked to exit rule entry.
Entry error, wrong bar code scanned. Re-enter criterion or action.
All previously entered criteria and actions are retained. Criteria or
action list is too long for a rule.
Scanning
Indication
2 - 3