Mitsubishi Electric MUZ-FH09NA Service Manual page 48

11-2. MUZ-FH15NA MUZ-FH15NAH
OPERATING PROCEDURE
1. Removing the cabinet
(1) Remove the screws of the service panel.
(2) Remove the screws of the top panel.
(3) Remove the screw of the valve cover.
(4) Remove the service panel.
(5) Remove the screws fixing the conduit cover.
(6) Remove the conduit cover.
(7) Remove the screw of fixing the conduit plate.
(8) Remove the conduit plate.
(9) Remove the top panel.
(10) Remove the valve cover.
(11) Disconnect the power supply and indoor/outdoor connect-
ing wire.
(12) Remove the screws of the cabinet.
(13) Remove the cabinet.
(14) Remove the screws of the back panel.
(15) Remove the back panel.
Photo 2
Screws of the top panel
Screws of
the cabinet
Screw of the Screws of the
valve cover service panel
OBH584A
Screw of the back panel
Screws of the
cabinet
Screws of the
back panel
NOTE: Turn OFF power supply before disassembly.
Photo 1
Screws of the top panel
Screws of the
cabinet
Photo 3
Screws of the conduit cover
Photo 4
Screw of the conduit plate
48
PHOTOS
Screws of the
cabinet