Setting The Metering Function; Turning Burst Mode On Or Off - Insignia NS-DSC1112 User Manual

Insignia 12 Megapixel Camera
3 Press / or
then press OK/DISP to open the submenu.
4 Press / or
press OK/DISP.
5 Press MENU again to close the menu.

Setting the metering function

This feature controls exposure metering in
recording still images.
Note
The metering function can only be set when Simple
mode is set to Off.
To set the metering function:
1 Slide the MODE switch to switch to Photo
mode.
2 Press MENU to open the Record menu.
3 Press / or
press OK/DISP to open the submenu.
/ to highlight Focus Light,
/ to select On or Off, then
12M 12M
/ to highlight Metering, then
www.insigniaproducts.com
4 Press / or
want, then press OK/DISP. You can select:
• Center—Averages the light metered from the
entire frame, but gives greater weight to the
subject matter at the center.
• Multi—Divides the image into several zones
and measures the light in each zone for a
balanced exposure reading. Your camera
determines shooting conditions according to
the measured lighting pattern, and makes
exposure settings accordingly.
• Spot—Locks the spot metering frame to the
center of the LCD.
An icon that corresponds to the metering
mode selected will appear on the left side of
the LCD.
Metering
icon
5 Press MENU again to close the menu.

Turning burst mode on or off

Burst mode allows for continuous shooting of
photos. Burst mode is not available in Video mode.
Note
The burst mode setting can only be adjusted when
Simple mode is set to Off.
To turn burst mode on or off:
1 Slide the MODE switch to switch to Photo
mode.
2 Press MENU to open the Record menu.
/ to select the setting you
12M 12M
17