2 .2.4 Lcd Scroll With Fau Lts Or Warn Ings - Toshiba G8000U Series Operation Manual

TOSHIBA
1 2.2.4 LCD Scro l l with fau lts or warn ings
Memory
Card
Option
NOTES
This section describes how to scroll through the LCD screens when a fault has occurred
(when Fault Data screens exist).
Figure 12.8 shows the locations of the buttons to scroll the LCD screens. See Table 12.9
and Figure 12.9 for detail of the scroll buttons and how they are used for screen scrolling.
Note that pressing the " RESET" button (9) will delete the waveform data stored on the
memory card as well as the Fault and Warning Data Screens. Be sure to remove the memory
card before pressing the " RESET" button.
�'-
Figure
When the UPS has stopped due to a fault, be sure to remove the
memory card before resetting the LCD Fault Error screen on the
panel.
Resetting (restarting) the UPS without removing the memory card will
delete the data needed to determine the cause of the fault.
When removing the memory card, do NOT touch the other sections
of the UPS.
Touching the other sections of the UPS may result in electric shock.
CYPs
SUPPLY
U Ps
ee ee
- OPERATI O N
STOP
OPERATI O N RUN
I N H I BITED
1 2.8 Position of Scro l l buttons in Fau lt Data Screens
CHARG E AC SWITCH
U Ps
BYPASS
- 49 -
6F3H1048
( 7 )
( 9 )