Kyocera Contax SL300RT* Instruction Manual page 80

7
The selected setting ([LT4S], etc.) appears on
the LCD monitor.
• Setting a slow shutter speed may result in 'noise' in the image.
• When you switch the camera off, the long exposure setting is cancelled and the camera
reverts to normal shooting (default).
• Take care to avoid camera shake. (
[ISO]
Changing the ISO Sensitivity to Photograph Fast Moving Subjects
4
The ISO setting corresponds to the ISO value of conventional film and indicates sensitivity
to light.
The ISO can be set to AUTO, 100, 200, 400 or 800, with the image quality deteriorating as
the number increases. Increasing the camera's sensitivity to light allows you to take pictures
in dark locations or use fast shutter speeds. It also slightly increases the effective range of
the flash. The default ISO setting is AUTO, in which case the camera sets the ISO
sensitivity to suit the ambient conditions.
1
Switch the camera on and press
button until the "
LED.
2
Press the MENU button K to display the menu icons.
3
Use or
L
SET DETAILS [
button
E
4
Press
U
[ISO] and then press
4-22
" or "
C
on the 4-way button to select
R
] and then press the OK
.
or on the 4-way button to select
D
.
R
p.4-4)
or
O
" icon lights on the mode select
N
Applicable mode: C/N
on the mode
Q
FOCUSING
ONG EXP.
ISO
METERING
DIGITA ZOOM
SETTINGS(2/2)
ET DETAIL
SPOT AF
OFF
AUTO
EVA UATION
ON