[Start Screen] Selecting The Startup Screen - Kyocera Contax SL300RT* Instruction Manual

3
Press
U
the desired color and then press the OK
button
E
4
The selected settings are applied and the screen in step 2
reappears.
[START SCREEN]
This procedure sets the startup screen displayed when you switch the camera on. In
addition to the default Kyocera logo screen, you can also select a startup screen from the
images saved on a memory card in the camera.
1
Switch the camera on and press
button until the "
2
Press
U
[START SCREEN] and then press
6
3
Press
L
the desired screen.
KYOCERA logo screen: Default
User-defined screen:
OFF screen:
● If either the Kyocera logo screen or OFF screen was selected in step 3
4
Press the OK button
● If a user-defined screen was selected in step 3
4
Press
D
screen.
The still images recorded on the memory card appear.
6-10
or on the 4-way button to select
D
.
" icon lights on the mode select LED.
G
or on the 4-way button to select
D
or on the 4-way button to select
R
Allows you to set an image stored on
a memory card.
Plain blue background
E
on the 4-way button to switch to the image selection
Selecting the Startup Screen
or
O
.
R
to finish the settings.
SET UP(2/3)
ORMAT
POWER SAVE
MODE LOCK
BEEP
SHUTTER VOL
COLOR SELECT BLUE
on the mode
Q
ET UP(3/3)
TART CREEN
REC REVIEW
LANGUAGE
FILE NO.
MODE RE ET
ELECT TART CREEN
ELECT IMAGE
OK
EXECUTE
3MIN.
YELLOW
RED
PURPLE
ET
2 EC
ENGLI H
EXECUTE
EXECUTE
OFF