Opening The Air Inlet Valve - Miele S 560 Operating Instructions Manual

Automatic setting
If the Automatic setting is chosen the
vacuum cleaner automatically adjusts
the suction power to suit the surface
being cleaned. This ensures the correct
power setting for the type of floor or
carpet being cleaned.
^ Keep pressing the - control until the
Automatic setting is activated.
^ Press the + control to de-activate the
Automatic setting.
,
Do not use the Automatic setting
to vacuum lightweight materials or
curtains. These could be sucked in
and possibly damaged.

Opening the air inlet valve

Opening the air inlet valve reduces the
suction power quickly for brief periods,
e.g. to prevent damage to the fringes of
a rug when moving from cleaning a car-
peted floor to a rug, or to prevent some-
thing being vacuumed up by mistake.
^ Open the air inlet valve far enough to
reduce the suction power.
The floorhead will be easier to ma-
noeuvre. Close the valve up again
when you are ready to use full power
again.
Operation
21