Lenovo ThinkCentre M78 User Manual page 75

1. Install the solid-state drive into the storage converter. Then, install the four screws to secure the
solid-state drive to the storage converter.
Figure 41. Installing the solid-state drive into the storage converter
2. To install the solid-state drive with the storage converter into the 3.5-inch hard disk drive bracket, flex
the bracket and align pin
the storage converter.
Figure 42. Installing the solid-state drive with the storage converter into the hard disk drive bracket
3. Connect the signal cable and the power cable to the solid-state drive.
4. Install the solid-state drive into the desired hard disk drive bay. See "Replacing the primary hard disk
drive" on page 58 or "Replacing the secondary hard disk drive" on page 60.
1 , pin 2 , pin 3 , and pin 4 on the bracket with the corresponding holes in
.
Chapter 5 Installing or replacing hardware
63