Netkrom Access Point Quick Installation Manual page 13

Wireless Point to Point
Setup
You can implement a Point-to-Point
connection by simply setting one access point
as RootAP in Access Point mode and setting
the other access point in Transparent Client
mode or in Client Mode.
Follow these steps to setup RootAP
Click on WLAN Setup from the
CONFIGURATION menu. You will see the
sub-menus expanded under WLAN Setup.
Click on Basic.
Ensure that The Current Mode is set to
Access Point.
Select Act as RootAP, click on the Apply
button and reboot your device to let your
changes take effect.
Setup Transparent Client Mode
Follow the same procedure explained in the
previous page.