Power Supply - Canon imageFORMULA P-208II User Manual

Back View
(1) Auto Start Switch
Use this switch to change the operation mode of the scanner.
(2) Eject Outlet
This outlet is for ejecting documents when scanning is completed.
(3) Theft Prevention Hole (Security Slot)
Attach a key chain, etc. here to prevent the scanner from being
stolen.
This scanner does not have a power switch. For details, "Power
Supply" on p.7

Power Supply

The power of the scanner is designed to turn ON when the feed tray
is opened or closed. To turn the power ON or OFF, operate the
scanner as described below.
Turning ON the Power
1
Open the document feed tray.
The scanner turns ON, and the Start button lights.
The Start button may blink slowly when the USB cable is connected and
the feed tray is opened. When this occurs, wait for the power indicator to
stop blinking and light steadily before using the scanner.
7